– It has an input feeding conveyor belt of link belt type with a useful length of approximately 2 meters and a width of 0.5 meters
– It has a fully automatic sorting and sorting system
– It has an automatic padding system (edgeless flooring) with motorized servo
– It has a separating bar system to prevent the product from overturning when the product passes through the exit gates
– It has bars for carrying goods to sort and create a suitable distance between the products exited from the gate
– With nylon carrier rods to perform the operation of wrapping the plastic around the product (overlapping operation)
– It has a link belt type nylon carrier belt to guide the nylon under the product
– With a PVC conveyor belt carrying the cartoned product before the overlap area
– With PVC conveyor belts in the overlap area to transfer the plasticized product into the thermal tunnel
– It has an automatic box cutter using a special steel cutter blade (HSS) and grooved rubber hubs
– It has a pneumatic roll opener system in order to create the necessary reserve for nylon tension
– It has a nylon storage roll system to reduce stops caused by changing the roll along with a sewing system with pneumatic actuators.
– With automatic and manual synchronizer system
– It has a mechanical protection system for separating and carrying goods and nablon rods
– It has a spiral air circulation system to even out the air temperature inside the tunnel
– Having the adjustment of hot air blowers inside the tunnel
– It has a special refractory furnace for indirect heating of the thermal tunnel
– Has a gas burner
– With cooling fans to increase the strength of the packaging
– With a special mesh conveyor belt using steel chains
– With a double fireproof silicone curtain to prevent energy loss at the beginning and end of the tunnel
– It has preheat and postheat at the beginning and end of the tunnel in order to prevent energy loss
– With 4 inches of stone wool and glass insulation
– With the ability to quickly replace the thermal elements from outside the tunnel
– It has a pneumatic control panel with pneumatic accessories including control and care unit, manifold, electric valves, flow controls
-Electrostatic paint coating for the body of the device
– With a roller table at the end to stop the goods on it
Ease of placing and replacing the film roll and embedding the storage roll location
– Complete piping inside the tunnel for the passage of wires and cables
– The ability to move the device with a rotating wheel and install it with fixed bases in a specific position
-Equipped with three aluminum doors for protection on both sides of the machine
– The ability to automatically adjust the temperature of the tunnel as a PID control with a tolerance of about 2 to 3 degrees Celsius
– High safety and protection to prevent burning of motors and electrical appliances in case of problems
– Set device parameters graphically through the HMI display
– Setting the frequency of all motor drives of the device through the HMI display
– Adjusting and monitoring the temperature inside the tunnel through the HMI display
-Monitoring all inputs and outputs of the device
– Tunnel temperature monitoring on the display through the PLC module
– It has a quick protection system in case of any problem in the automatic operation of the device (the package gets stuck in the bars of the device, etc.)
– It has a printed plastic cutting system (patterned)
– It has an automatic synchronizer system with the fastest possible time through PLC
– It has a transformer that reduces the sewing part of the storage roll for more safety
– With electronic sensors for automation applications
– It has a power regulator system using a three-phase SSR to increase the life of the device’s thermal elements and reduce the thermal tolerance of the tunnel, as well as reduce electricity consumption by 50%.
– It has a motorized servo cutter system
– With motorized servo conveyor system
– It has an electricity arrester system on the box cutter of the device in order to reduce the effects of static electricity
SH-850PEG overlay shearing device + transfer pad
It has the ability to share products with a production circulation of more than 12 packages per minute up to a speed of 40 packages per minute in a fully automatic manner. Overlap shearing machine is one of the types of high speed shearing machines, which performs the operation of shearing pack without sewing plastic. Overlap shearing machine + SH-850PEG transfer pad is mostly used in industries such as dairy, vegetable oils, mashir, fruit juice. And…the packages are heavy and need a cardboard pad to increase strength, and high speed is required.
برق ورودی | |
---|---|
توان مصرفی |
85KW |
هوای مصرفی | |
سرعت کارکرد |
1500 to 1800 packages per hour |
دهانه تونل |
The opening height is 40 cm, The width of the opening is 80 cm |
وزن دستگاه | |
انرژی گرمایی تونل حرارتی |
dual fuel (electric and gas) |
فیلم مصرفی |
LDPE polyethylene, Width 50 cm |
گاز مصرفی |
1/4 pound per square inch, 7 to 14 cubic meters per hour |