– It has a central conveyor belt to place a 300 cm long pallet in the middle
– With an end conveyor to place a 170 cm long pallet on it
– It has a holding system, sewing and cutting of stretch film
– It has a rotating mast system and a roll column integrated so that the product (pallet) is fixed and the roll column circulates around it.
– It has the ability to stretch the stretch film to increase the strength of the packaging
– It has a Pre-Sterech system to reduce the consumption of stretch film by 70% (according to the type, quality and thickness of the stretch film)
– With a rail and carriage system for linear and accurate movement without vibration of the roll column and increasing the life of the roll column system
– With pneumatic system and accessories
-Having a bearing system in the center of the rotating mast to neutralize axial and radial loads
– It has input and output conveyor supports and a ground stopper to operate the forklift with the device
– The ability to stretch 2 cm from the pallet with a height of 15 cm (the ability to use a fixed position on the bottom of the machine for more overlapping)
– Ability to disassemble all parts of the device into small parts for easy transportation
Ease of installation and replacement of stretch film (one operator is needed to change the stretch roll and initially connect the film to the holder and monitor the operation of the device)
– Wires and cables of the coated and flexible type to protect power and steering wires and cables
– It has a command control system to adjust the number of twists, stretches and overlap of the stretch film at the top and bottom of the pallet and operator settings for easy use.
– With speed control of AC asynchronous motors (single-phase inverter)
– Having the ability to manually and automatically start the input conveyor to guide the pallet to the machine
– Having the ability to adjust the overlap amount of the stretch film by changing the motor speed of the lifting column
– It has the ability to stop the rotating mast in a specific and fixed place
– With trans sewing and cutting
– It has a remote control to stop the device in emergency mode and initial roll
– It has 5 input, central and end conveyor optical sensors to guide pallets
– It has microswitches that limit the top and bottom of the roll column
– With a sensor to adjust the height of the pallet
– With rotating mast sensor
– Has a rotating mast encoder
– It has a protective microswitch for the entrance doors
.