-Having a bearing system in the center of the rotating mast to neutralize axial and radial loads
– It has the ability to stretch the stretch film to increase the strength of the packaging
– It has a Pre-Stretch system to reduce the consumption of stretch film by 70% (according to the type, quality and thickness of the stretch film)
– It has a fence on the four sides of the device
– Electrostatic paint coating
Ease of installation and replacement of stretch film (one operator is needed to change the stretch roll when the roll is finished, as well as connecting the beginning of the film to the pallet and separating it at the end of each packaging)
– Ability to disassemble all parts of the device into small parts for easy transportation
– Feeding the device by a forklift with a mast height of 3400 mm
-Has a PLC controller to control the operation of different parts of the device
– HMI display to adjust the number of twists at the top and bottom of the pallet and operator settings
– With speed control of AC asynchronous motors (inverter)
– It has a collector to transmit the signals of sensors and the required power to the motors of the rotating parts
– With a mirrored optical sensor at the entrance of the device
– It has a device revolution counter sensor
– With pre-stretch roll opening sensor
– With pallet height adjustment sensor
– With micro switches limiting the top and bottom of the roll column
– The ability to adjust the amount of overlap of the stretch film by changing the motor speed of the lifting column
– Wires and cables of the coated and flexible type to protect power and steering wires and cables
.