– It has a perforated link belt feeding conveyor on the right side of the machine’s sewing entrance with a width of 33 cm.
– It has a moving conveyor belt after sewing to transfer the package from the sewing part to the tunnel conveyor in order to prevent the plastic products from sticking to each other, increasing the sewing quality and increasing the speed and efficiency of the machine.
– It has a tunnel conveyor made of galvanized mesh
– It has three rows of steel separator rails with the ability to adjust for bottomless products
– It has line fullness indicators for each input feeding line separately
– It has a pneumatic system for moving the product in the input feed in order to prevent the product from getting stuck in the input of the separating rails for bottomless products.
– It has a screen input gate system using two pneumatic actuators
– It has a pneumatic feed system with a rail and wagon guide on the side wall and under the entrance of the machine in order to avoid disturbing the operator at the entrance table.
– It has a pneumatic product separation system at the end of the feeding conveyor in order to create a distance with the input depot and prevent products from getting involved.
– It has a pneumatic system of the blade before sewing in order to avoid messing up the arrangement of the product without a bottom in the forward part of the machine.
– It has a high automatic roll opener system with relevant fixtures to open static electricity plastics and prevent plastic from getting stuck and wrapped around the roll hub.
– It has a blade sewing system with a fireproof coating made of industrial Teflon material
– It has a plastic sewing line cooling system in order to increase the speed of the machine and prevent the sewing line from breaking at high speed
– It has a one-way pneumatic movable support system after sewing in order to prevent the product from being messed up without a twisted plastic bottom and its falling.
– It has a pneumatic holding system after sewing in order to prevent the product from returning and falling under the sewing and damaging it.
– It has a spiral air circulation system with 2 fan packing devices
– It has a fireproof silicone curtain to prevent energy loss at the beginning and end of the tunnel
– It has valves to adjust the height of the entrance and exit of the tunnel
– With a 40 cm long end roller table to stop goods on it
– It has a special fireproof furnace with a burner for the gas system
– It has three cooling fans at the end of the device
– Pneumatic dashboard with attached belongings
– The ability to move the device with a rotating wheel and install it with fixed bases in a specific position
– Ability to install along the production line in an L shape with a 90 degree angle
– Electrostatic furnace paint
– 4 inch glass wool insulation
– Easy to install and make a movie roll
– Quick replacement of thermal elements from outside the tunnel
– Complete piping inside the tunnel for the passage of wires and cables
-Adjustment of hot air blowers inside the tunnel
– It has a switchboard connected to the body of the device along with electrical accessories on the left side of the tunnel entrance of the device
– It has PLC command control to control the operation of the device
– HMI display to set the automation parameters of the device
– It has 4 remote control (inverters) AC asynchronous motors for feeding motors, top roll, conveyor after sewing and tunnel conveyor
– It has a transformer to reduce the voltage of the sewing element for the safety of the operator against the risk of electrocution
– It has a mirror optical sensor of the fullness of the feeding lines
– Has an inductive sensor to stop the product
– It has a mirrored optical sensor for under-stitching protection
– It has a magnetic sensor to protect the sewing jack
– It has inductive sensors limiting the front and rear course of the drive system
– With inductive roll opener sensor
– The ability to automatically adjust the sewing temperature by the thermostat as PID control in order to increase the accuracy of the sewing temperature by 1 degree and prevent the sewing line from malfunctioning.
– The ability to automatically adjust the temperature of the tunnel by the thermostat as ON/OFF control
– Be sure to protect your motor and cable accessories if a problem arises
– Wires and cables of the coated and flexible type to protect power and steering wires and cables
– Power transmission chain (CABLE CHAIN) for passing the wires of the moving sewing part and the leading part
SH-460APSEG automatic sheeting machine with floor leveler
The ability to shrink pack products such as PET, glass, bottles, etc., without a bottom, and often for packaging in the form of loose mineral water, loose soft drinks, loose buttermilk, loose milk, etc. It is applicable. SH-450APEG PET Automatic Shrinking Pack Machine works automatically and has the ability to be installed in a vertical production line. Do not stop production.
Category: Packaging machine
Description