– It has three separate plastic sewing and cutting stations on the sides of the machine tunnel entrance
– It has a pneumatic sewing system with replaceable blade sewing with a fireproof coating made of industrial Teflon material
– It has a spiral wind transmission system with 2 cleaning fans for air circulation inside the tunnel
– It has a chain bar conveyor with an anti-wear epoxy polyester paint coating
– It has a cooling fan system using 3 blowers that blow from the top along the width of the device to the output product of the tunnel.
– Has one pneumatic panel with pneumatic accessories for all three workstations
– The ability to adjust the height of the entrance and exit valves of the tunnel through the rotating handle
– Electrostatic blue color
-Silicone screen to prevent energy loss at the beginning and end of the tunnel
– 4 inch glass wool insulation
– Ease of replacing the used film roll
– Quick replacement of thermal elements from outside the tunnel
– Harzgerd roller table before and after sewing for all three workstations
– 200 cm long end roller table to stop goods on it
– Piping and channeling inside the tunnel for the passage of wires and cables
-Adjustment of hot air blowers inside the tunnel
– The ability to move the device with a rotating wheel
– Special refractory oven with torch
– Direct coupling of engine and gearbox system
– It has a pneumatic sewing system with replaceable blade sewing with a fireproof coating made of industrial Teflon material
– It has a spiral wind transmission system with 2 cleaning fans for air circulation inside the tunnel
– It has a chain bar conveyor with an anti-wear epoxy polyester paint coating
– It has a cooling fan system using 3 blowers that blow from the top along the width of the device to the output product of the tunnel.
– Has one pneumatic panel with pneumatic accessories for all three workstations
– The ability to adjust the height of the entrance and exit valves of the tunnel through the rotating handle
– Electrostatic blue color
-Silicone screen to prevent energy loss at the beginning and end of the tunnel
– 4 inch glass wool insulation
– Ease of replacing the used film roll
– Quick replacement of thermal elements from outside the tunnel
– Harzgerd roller table before and after sewing for all three workstations
– 200 cm long end roller table to stop goods on it
– Piping and channeling inside the tunnel for the passage of wires and cables
-Adjustment of hot air blowers inside the tunnel
– The ability to move the device with a rotating wheel
– Special refractory oven with torch
– Direct coupling of engine and gearbox system
– An electrical panel connected to the tunnel body of the device with electrical accessories on the left side of the tunnel entrance
– Three separate electrical panels connected to each of the sewing stations
– Wires and cables of coated type
– Fireproof wires for the thermal parts of the seam and tunnel
– The ability to automatically adjust the temperature of the tunnel for proper packaging by the thermostat as ON-OFF control
– The ability to automatically adjust the sewing temperature for proper packaging by thermostat as PID control
– Ability to simultaneously and separately use electricity and gas for tunnel heating
– Protection of motors against overload in case of problems
– Three transformers reducing the sewing part for greater safety of the operator against electrocution
– Special thermal rod elements for tunnel and sewing
– The ability to adjust the speed of the tunnel conveyor motor through the inverter
– Two numbers of serial starters on both sides of the entrance of each station for safety
– One number of emergency keys for the entrance of each station
– Three separate electrical panels connected to each of the sewing stations
– Wires and cables of coated type
– Fireproof wires for the thermal parts of the seam and tunnel
– The ability to automatically adjust the temperature of the tunnel for proper packaging by the thermostat as ON-OFF control
– The ability to automatically adjust the sewing temperature for proper packaging by thermostat as PID control
– Ability to simultaneously and separately use electricity and gas for tunnel heating
– Protection of motors against overload in case of problems
– Three transformers reducing the sewing part for greater safety of the operator against electrocution
– Special thermal rod elements for tunnel and sewing
– The ability to adjust the speed of the tunnel conveyor motor through the inverter
– Two numbers of serial starters on both sides of the entrance of each station for safety
– One number of emergency keys for the entrance of each station
.