– It has the ability to stretch the stretch film to increase the strength of the packaging
– It has a Pre-Stretch system to reduce the consumption of stretch film by 70% (according to the type, quality and thickness of the stretch film)
– It has a holding system for the beginning of the stretch film for the automatic operation of the device
– It has an automatic sewing and cutting system for the automatic operation of the device
– With pneumatic system and accessories
-Having a bearing system in the center of the rotating mast to neutralize axial and radial loads
– The ability to stretch 2 cm from the pallet with a height of 15 cm (the ability to use a fixed position on the bottom of the device for more overlapping)
– Ability to disassemble all parts of the device into small parts for easy transportation
Ease of installation and replacement of stretch film (one operator is needed to replace the stretch roll and initially connect the film to the holder and monitor the operation of the device)
-Has a PLC and HMI command control system to adjust the number of twists, stretches and overlap of the stretch film at the top and bottom of the pallet and operator settings for easy use
– With speed control of AC asynchronous motors (inverter)
– It has the ability to stop the rotating mast in a specific and fixed place
– With a rotating mast rotation counter sensor
– With pre-stretch roll opening sensor
– With pallet height adjustment sensor
– It has micro-switches limiting the up and down movement of pre-stretch
– The ability to adjust the amount of overlap of the stretch film by changing the motor speed of the lifting column
– Wires and cables of the coated and flexible type to protect power and steering wires and cables
.