Specifications of CS-25E cellophane sewing and cutting machine
First, the operator puts the doula plastic roll, which is open on one side and closed on the other side, into the roll opener, and passes the bottom layer of the plastic roll under the work tray, and Berti puts it on the sewing part for the first time, and a stitch in the mode He makes longitudinal and transverse cuts on the plastic. Then he lifts the upper layer of the plastic that is on the tray, places the product between the upper and lower layers, and pulls the product and the plastic towards the seam with the right clearance from the blade. lowers the sewing handle and waits for the sewing handle to return to its initial state after a certain time that can be set. After that, the operator removes the product from the machine and performs the above tasks again.
– It has a sewing and cutting system with ceramic insulation 50 x 50 cm
– With an electromagnetic magnet system
– Electrostatic painting
– Easy to install and make a movie roll
– The ability to move the device with a rotating wheel
– The ability to change the height of the sewing line according to the height of the product
– Electric panel connected to the body of the device with electrical accessories
-Manual steering circuit
– Wires and cables of coated type
– The ability to adjust the sewing time according to the type and thickness of the plastic used
– A transformer that made it dizzy for Emani Bechter
-Electromagnetic magnet to hold down the sewing handle without operator force