arm rotator stretch wrapping machine SW-3000P

-It has an integrated rig and roll column system in such a way that the product (pallet) is fixed and the roll column rotates around it.
– Has a bearing system in the center of the revolving mast to neutralize axial and radial loads
– Has the ability to stretch the stretch film to increase the strength of the package
– Has a Pre-Stretch system to reduce the consumption of stretch film by 70% (according to the type, quality and thickness of stretch film)
– Has a fence on the four sides of the device
Electrostatic paint coating
Ease of installation and replacement of stretch film (requires an operator to change the stretch roll at the end of the roll and also connect the beginning of the film to the pallet and separate it at the end of each package)
– Ability to disassemble all parts of the device into small parts for easy transport
– Powering the device by forklift with a mast height of 3400 mm
– Electrical panel connected to the body of the device along with electrical accessories
– Has a PLC controller to control the performance of different parts of the device
-Has an HMI display to adjust the number of turns at the top and bottom of the pallet and operator settings
-Controlled asynchronous AC motors (inverter)
– Has a collector to transmit the signal of sensors and the required power to the motors of rotating parts
– Has a mirrored light sensor at the input of the device
-Has a counter speed sensor
– Has a pre-stretch roll opener sensor
– Has a pallet height adjustment sensor
– Has limiting microswitches above and below the roll column
– Ability to adjust the amount of stretch film overlap by changing the motor speed of the lift column
Wires and cables of coated and flex sprayer type to protect wires and power and steering cables